ALITOVE WS2811 Addressable RGB LED Strip Light 12V 16.4ft 5m 300 LEDs Flexible Rope Light Not waterproof Black PCB for Xmas Party Decoration TV Backlight Outdoor Advertising Signs

0




Buy Now with Best Price



Parameter
Model: 5m/roll WS2811 dream color LED strip
Light source: SMD 5050 RGB
Wave length (NM): R/650nm; G/520nm; B/460nm
FPCB color: Black
Protection Rate: Not Waterproof (Cannot be used outdoor)
LED quantity: 60LEDs/m, 5m 300 LEDs in total
IC Model: WS2811 IC, one IC controls three LEDs
Working Voltage: 12V DC
Max Working Current: 6A
Power:14.4W/M, 72W/Roll
Beam angle: 120 degree
Working temperature: -20 to 60 Degrees Celsius
Size: L500cm (5M) x W1cm x T0.25cm
Net weight: 100g
Life span: >50000 hours
Kindly note: The LED strip comes without power supply and controller.

Application
Ideal decorative lighting for party, wedding, festival, holiday, Xmas, Halloween, light sculpture, decorative figure,
outdoor advertising signs, displays, shop windows, storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway.

Package included
1 x 5M LED strip light
1 x 3 PIN JST Connector

To let it work, you may need these
12V 5A Power supply:
https://www.amazon.com/dp/B01GEA8PQA

SP105E Bluetooth Magic LED Controller:
https://www.amazon.com/dp/B01LW1J10W

12V SP103E Mini Wireless RF Remote Controller:
https://www.amazon.com/dp/B01HCHHLZA

T1000S LED Controller:
https://www.amazon.com/dp/B01M4IX5FF

WS2811 LED strip kit:
https://www.amazon.com/dp/B01MPZXEHV


5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
It can be programmed with Arduino, FastLED library, Raspberry Pi, FadeCandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
It can be programmed with Arduino, FastLED library, Raspberry Pi, FadeCandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers.
It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
It can be programmed with Arduino, FastLED library, Raspberry Pi, FadeCandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
It can be programmed with Arduino, FastLED library, Raspberry Pi, FadeCandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers.
It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
Come with 3pin JST-SM connectors and separated power/ground wires on both ends. Each group can be cut off at cutting line. You can shorten, lengthen or bend it freely if you want.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
It can be programmed with Arduino, FastLED library, Raspberry Pi, FadeCandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
It can be programmed with Arduino, FastLED library, Raspberry Pi, FadeCandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers.
It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
It can be programmed with Arduino, FastLED library, Raspberry Pi, FadeCandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
5m long with 300 RGB LEDs and 100 WS2811 ICs which are organized in groups of 3 LEDs with 1 IC. Each group is addressable individually, 3 LEDs in a group are showing the same color.
It can be programmed with Arduino, FastLED library, Raspberry Pi, FadeCandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers.
It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
Come with 3pin JST-SM connectors and separated power/ground wires on both ends. Each group can be cut off at cutting line. You can shorten, lengthen or bend it freely if you want.
It can be used to make led screen, led wall, advertising board, outdoor advertising signs and widely applied to hotel, KTV, bars, wedding party lighting and so on.